Bare Sentry Tech Dry Men's Drysuit
The Avatar suit offers all essential features you need in a proper drysuit set-up.
Boots are important - thanks to them you can control the work of your fins under water and thermal comfort of your feet.
The suit is equipped with modern, comfortable, waterproof boots made of 3mm neoprene. The sole is reinforced from the inside with an additional insert. From the outside it is covered with a rubber sole that protects your toes and heel. The boots have a convenient tab to position the fin strap and a Velcro strap around the ankle to prevent the boots from capturing too much air.
The size of the boots was selected to match the size of the suit body construction after a detailed, practical ergonomic analysis and already contains an adequate space for a warm insole or additional pair of diving socks.
Practical, spacy pockets in the right size should be useful for any diver who wants to be properly secured underwater. In Avatar you get two comfortable and spacious technical pockets with bungee loops for attaching small items to the bolt snap, and with eyelets for draining water. The pockets are ideally suited for opening in dry gloves, as at the end of the flaps they have a special gripper and a wide Velcro closing.
Smart Seals System - an innovative, flexible system mounted in the cuffs of a drysuit which allows you to easily change the wrist seals yourself at any time, without the need for special tools or glue. The system also allows you to use the compatible Smart Gloves system, so you can mount any dry gloves you want to your drysuit.
Avatar is equipped with a cool, waterproof, practical travel bag with tapped seams, fastened with a buckle strap to transport the suit.
The set also includes a neoprene hood, an inflation hose, and a silicone lubricant for the zipper.
When you buy an Avatar, you get everything you need for comfortable and safe diving in a dry suit.
The fabric in the AVATAR is not a random choice. The suit is extremely lightweight, functional, and last, but not least - it looks great.
Innovative, breathable, four-layer membrane material with a weight of 200 g/m2 allows vapor-permeability from the inside thanks to the pores of the membrane and water tightness from the outside. From both sides the membrane is covered with nylon, that dries very quickly. It is especially appreciated when during a dive interval or after a dive day you want your suit to be dry as soon as possible.
Thanks to this fabric an Avatar weighs less than 3 kg, it is easy to roll up and compactly pack to take it anywhere with you.
Avatar is reinforced on the knees, crotch, elbows and buttocks with a thicker nylon Oxford fabric (a special weave of fibres), which serves to protect areas more exposed to abrasion or puncture.
Waterproof plastic zipper at the front, whose location is extremely important for self-donning and doffing the suit, is covered by a pleat protecting the teeth of the zipper against sand or dirt.
Latex neck seal is protected by neoprene insulation, which also serves as an overlap on the collar of the neoprene hood.
Inside the suit there are braces, which allow you to keep the suit in the right position on the body after putting on the undersuit.
Each suit that comes out of the production line is specially checked for full water tightness, precision of craft and finish.
Each one is cleaned and packed with the user in mind.
The men's version of the drysuit is available in 12 standard sizes.