Ammonite Drysuit Inflation Thermo Valve S360 T-Valve (Si-Tech)
AMMONITE360 degree swivel head
T-VALVE can rotate a total of 360 degrees allowing for a wide range of hose configurations – thus, it truly doesn’t matter in this case if one rig routes the drysuit hose under the right arm and another – under the left.
Highest quality coaxial E/O cable
Constructed using a virtually unbreakable E/O cable. Thanks to its coaxial structure with an extended cross-section of a copper conductor, a lowered resistance is achieved, which increases the performance of the entire heating system.
Higher performance, lower profile
Ammonite System T-VALVE has also a very low profile, streamline construction and features a domed form to limit the snag hazard regardless of where the valve is positioned.
Thanks to an extra-large recessed push-button it is effortless yet controlled to operate even with thick gloves or cold hands.
Supreme quality construction
The thermo valve is robust due to its nickle plated brass and stainless steel parts. The carefully designed structure contributes to the reduction of the wear of the seals and general exceptional durability.
Progressive and smooth air management
An extra-large recessed push-button is effortless yet controlled which makes it easy to operate even with thick gloves or cold hands. Moreover, a strong spring of the push-button ensures precise and progressive control of airflow and stopping the flow dead when the button is released.
A smooth backplate with a dozen or so ammonite-shaped holes gives protection from uncomfortable pressure loads on the chest and prevents cold air blasts through underclothing.
Ergonomic design
T-VALVE ergonomic design is thought-out in such a way that it provides top comfort of use. Its constructional reliability ensures progressive and smooth gas flow along with safe exploitation in any conditions. It’s designed for years and years of trouble-free use.
T-Valve is backed by an extended to 3 years warranty.
Convenient mounting and dismounting
T-VALVE can be easily installed and removed without the use of additional tools. But to make its users’ life even easier and simplify the (dis)mounting process, we add a steel wrench to each thermo valve.
T-VALVE kit contains:
- S360 T-VALVE
- dis/mounting wrench
- manual and certificate
- eco-friendly packaging
Attachment standard only.
- Wide 65 mm
- Height 27 mm*
Diameter of the mounting opening +/- 33 mm
Connect the valve to your first stage via a 3/8”
UNF male coupling.